Cm55 Kmd Conical Twin Screw Barrel Double Screw Barrel PVC Pipe Extruder

Model NO.: Twin conical screw barrels Plastic Processed: PVC Automation: Automatic Size: Customize Nitrided Layer Depth: 0.5-0.8mm Trademark: ZHONGYANG Origin: China(Mainland) Zhejiang Type: Pipe Extruder Screw: Twin-Screw Computerized: Computerized Material: Nitriding Steel Nitrided Hardness: HRC56-58 Specification: ISO9001: 2008 approved HS Code: 84779000 Twin conical Screw Barrel,CM55 Kmd Series Conical screw barrel,  PVC pipoe/profile extruder screw barrel, Twin Screw And Barrel, double screw barrel, twin conical screws barrel
Specification:
45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/135, 70/140, 75/150, 80/143, 80/156, 92/188

The above are standard specifications, we can customize according to customers' requirements.

The compression ratio of screws can be designed according to different products and ingredients.

Base Materials:
1)38CrMoAlA(JIS SACM645)
2)42CrMo(AISI 4140)
3)4Cr5MoSi V1 (JIS SKD-61)
4)9Cr18MOV
5)HPT

Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy Welding
Bimetallic alloy centrifugal casting

Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm

Experienced manufacturer, we will be the best choice.
Focus on quality and service.

Main Base materials	1.38CrMoAlA  (Nitriding Steel)
	2.  SKD-61   (Special Tool Steel)
	3.  42CrMo (Ultrahigh Strength   Steel)
	4. DC53 ( Cold Work   Die Steel)
	5. W6Mo5Cr4V2 ( High-Speed   Tool   Steel )
	6. HPT
Main Alloy Materials	1.  Ni-based alloy/Deloro alloy
	2.  Tungsten carbide/Wolfram carbide
	3.  NiCo-based alloy
	4.  Fe-based alloy
	5.  Co-based alloy
Processing Technics	1.  Heat treatment
	2.  Quenching
	3.  Nitriding treatment
	4.  Bimetallic alloy welding
	5.  Bimetallic alloy centrifugal casting
	6.  Hard-chrome electroplating
Technical parameters	Nitriding layer depth	0.5-0.8mm
	Nitrided hardness	HRC56-58
	Nitrided brittleness	Less than grade 1
	Surface roughness	Ra 0.4
	Linearity of screw	0.015mm
	Hard-chrome plating hardness	≥HRC57
	Chrome-plating layer depth	0.03-0.09mm
	Bimetallic layer depth	3 mm
	Bimetallic layer hardness	HRC58-62
Above are main technical information, a suitable screw and barrel will be made according to your requirement.

Contact us if you need more details on Twin Conical Screw Barrel. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Conical Twin Screw And Barrel、Screw and Cannon. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Conical Twin Screw And Barrel