Single Screw and Barrel for Film Extruder
Basic Info
Model No.: Dia15-300mm
Product Description
Model NO.: Dia15-300mm Nitrided Layer Depth: 0.5-0.8mm Nitrided Brittleness: Less Than Grade 1 Linearity of Screw: 0.015mm Specification: ISO9001: 2008 HS Code: 84779000 Screw Barrel: Single Screw And Barrel Nitrided Hardness: 900-1000hv Surface Roughness: Ra0.4 Trademark: ZHONGYANG Origin: Zhejiang of China Single Screw And Barrel for Film Extruder
Specification:
Screw Diameter: Φ 15- Φ 300
L/D ratio: 15-46
Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc.
Technical Information
Base Materials:
1). 38CrMoAlA(JIS SACM645).
2). 42CrMo(AISI 4140).
3). 4Cr5MoSi V1 (JIS SKD-61).
4). 9Cr18MOV
5). HPT
Bimetallic alloy materials:
1). Fe-based alloy
2). Ni-based alloy/Deloro alloy
3). Co-based alloy
4). NiCo-based alloy
5). Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy Welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: >=950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Contact us if you need more details on Single Screw Cylinder for Blowing Mold. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Screw Cylinder for Blowing Molding、Screw Cylinder. If these products fail to match your need, please contact us and we would like to provide relevant information.
Specification:
Screw Diameter: Φ 15- Φ 300
L/D ratio: 15-46
Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc.
Technical Information
Base Materials:
1). 38CrMoAlA(JIS SACM645).
2). 42CrMo(AISI 4140).
3). 4Cr5MoSi V1 (JIS SKD-61).
4). 9Cr18MOV
5). HPT
Bimetallic alloy materials:
1). Fe-based alloy
2). Ni-based alloy/Deloro alloy
3). Co-based alloy
4). NiCo-based alloy
5). Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy Welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: >=950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Contact us if you need more details on Single Screw Cylinder for Blowing Mold. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Screw Cylinder for Blowing Molding、Screw Cylinder. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Extruder Screw And Barrel
Premium Related Products
Other Products
Hot Products
Screw and Barrel for Rubber Extruder MachineInjection Molding Screw Barrel PP Injection Screw BarrelSegmented Barrel Sectional Barrel Plastic Extruder BarrelMulti Screw for Extruder and Planetary Screw BarrelSheet Extruder Single Screw Barrel / Single Screw Barrel for Extruder (Dia15-300mm)Feed Screws Extruder ScrewsDouble Screw and Barrel/Parallel Twin Screw and BarrelAccessories of Injection Screw/Injection Machine Accessoriesfeed housing with 38CrMoAlA base steel for barrelbimetallic screw with Ni60 from KENNAMETAL STELLITE38CrMoAlA screw barrel for injection molding machineinjection mould machine screw barrel with nitrided and bimetallic treatmentPVC plastic machine screw barrel/Extruder Conical Twin Screw Barrelparallel twin screw barrel for plastic extruder machine with competitive pricesingle barrel for extruder/high quality barrel for plastic extruder machineextruder rubber screw for pvc wire extrusion machine