Find Single Screw Cylinder, Extrusion Screw Barrel, Single Screw For Extruder on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Extruder Single Screw And Barrel > PE Extrusion Screw Barrel Extruder Screw Barrel Bimetallic Screw Barrel

PE Extrusion Screw Barrel Extruder Screw Barrel Bimetallic Screw Barrel

Basic Info

Model No.:  PE extrusion screw barrel

Product Description

Model NO.: PE Extrusion Screw Barrel Plastic Processed: PE Automation: Automatic Trademark: ZHONGYANG Origin: Zhejiang of China Type: Sheet Extruder Screw: Single-Screw Computerized: Computerized Specification: ISO9001: 2008 approved HS Code: 84779000 PE Extrusion Screw Barrel, extruder screw barrel, Bimetallic Screw Barrel, extrusion screw barrel

Specification:
Screw Diameter: Φ 15- Φ 300
L/D ratio: 15-46

Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc.

Technical Information

Base Materials:
1). 38CrMoAlA(JIS SACM645).
2). 42CrMo(AISI 4140).
3). 4Cr5MoSi V1 (JIS SKD-61).
4). 9Cr18MOV
5). HPT

Bimetallic alloy materials:
1). Fe-based alloy
2). Ni-based alloy/Deloro alloy
3). Co-based alloy
4). NiCo-based alloy
5). Tungsten carbide/Wolfram carbide

Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy Welding
Bimetallic alloy centrifugal casting

Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: >=950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm: 3mm

Warranty and service: 1 year

Our advantages:
1). Excellent raw materials
2). Good customer service
3). Rapid delivery
4). Reasonable price
5). Production quickly

Experienced manufacture, we will be the best choice.

Main Base materials
 
1.38CrMoAlA  (Nitriding Steel)
2.  SKD-61   (Special Tool Steel)
3.  42CrMo (Ultrahigh Strength   Steel)
4. DC53 ( Cold Work   Die Steel)  
5. W6Mo5Cr4V2 ( High-Speed   Tool   Steel )
6. HPT

 
 
Main Alloy Materials
1.  Ni-based alloy/Deloro alloy
2.  Tungsten carbide/Wolfram carbide
3.  NiCo-based alloy
4.  Fe-based alloy
5.  Co-based alloy  

 
 
 
Processing Technics
1.  Heat treatment
2.  Quenching
3.  Nitriding treatment
4.  Bimetallic alloy welding
5.  Bimetallic alloy centrifugal casting
6.  Hard-chrome electroplating

 
 
 
 
Technical parameters
Nitriding layer depth 0.5-0.8mm
Nitrided hardness HRC56-58
Nitrided brittleness Less than grade 1
Surface roughness Ra 0.4
Linearity of screw 0.015mm
Hard-chrome plating hardness ≥HRC57
Chrome-plating layer depth 0.03-0.09mm
Bimetallic layer depth 3 mm
Bimetallic layer hardness HRC58-62
Above are main technical information, a suitable Screw And Barrel will be made according to your requirement.

Contact us if you need more details on Extrusion Screw. We are ready to answer your questions on packaging, logistics, certification or any other aspects about PE Extrusion Screw、Extruder Screw Barrel. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Extruder Single Screw And Barrel

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters