High Quality Injection Moulding Single Screw and Barrel
Product Description
High speed screw: Single Screw Specification: ISO 9001: 2008 approved HS Code: 84779000 Trademark: ZHONGYANG Origin: Zhoushan, China Specification:
Screw Diameter: Ø 15- Ø 300
L/D ratio: 15-46
Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc.
Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
Nitriding treatment
Bimetallic alloy Welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Experienced manufacturer, we will be your best choice. Contact us if you need more details on Screw And Barrel. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Single Screw And Barrel、Screw and Cylinder. If these products fail to match your need, please contact us and we would like to provide relevant information.
Screw Diameter: Ø 15- Ø 300
L/D ratio: 15-46
Product classification:
Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc.
Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
Nitriding treatment
Bimetallic alloy Welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Experienced manufacturer, we will be your best choice. Contact us if you need more details on Screw And Barrel. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Single Screw And Barrel、Screw and Cylinder. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Single Screw And Barrel For Injection Molding Machine
Premium Related Products
Other Products
Hot Products
Screw and Barrel for Rubber Extruder MachineInjection Molding Screw Barrel PP Injection Screw BarrelSegmented Barrel Sectional Barrel Plastic Extruder BarrelMulti Screw for Extruder and Planetary Screw BarrelSheet Extruder Single Screw Barrel / Single Screw Barrel for Extruder (Dia15-300mm)Feed Screws Extruder ScrewsDouble Screw and Barrel/Parallel Twin Screw and BarrelAccessories of Injection Screw/Injection Machine Accessoriesfeed housing with 38CrMoAlA base steel for barrelbimetallic screw with Ni60 from KENNAMETAL STELLITE38CrMoAlA screw barrel for injection molding machineinjection mould machine screw barrel with nitrided and bimetallic treatmentPVC plastic machine screw barrel/Extruder Conical Twin Screw Barrelparallel twin screw barrel for plastic extruder machine with competitive pricesingle barrel for extruder/high quality barrel for plastic extruder machineextruder rubber screw for pvc wire extrusion machine